Stainless Steel Wire Mesh (Cloth)

Next >>

Product Code : 11

Product Specification

Stainless Steel Wire Mesh (Cloth)
Micro Mesh can offer wide range of Wire Cloth dependents on the configuration of wire thickness in relation to aperature size, as well as type of weaves, and can vary in texture from being as fine, soft and flexible as silk to being as rigid as steel plate. Fine Wire Mesh is available in rolls or in cut circles and also as fabricated filters. It can be made available in difficult metals like S.S./Phos./Bronze/Brass.

Material for weaving stainless steel wire mesh ( wire cloth ) is divided into Type 304, Type 304 L, Type 316 and Type 316 L.

Type 304:
Often referred to as "18-8" ( 18% chromium, 8% nickel ) T-304 is the basic stainless alloy mostly
commonly utilized for wire cloth weaving. It withstands outdoor exposure without rusting and resists oxidation at an elevated temperature up to 1400 Degrees Fahrenheit.

Typical wire cloth applications include use with chemicals, food products, pharmaceuticals and exposure to moisture.

Type 304 L :

Type 304 L is very similar to T-304, the difference being the reduced carbon content for better weaving and secondary welding characteristics.

Type 316 :

Stabilized by the addition of 2% molydbenum, T-316 is an "18-8" alloy.

Type 316 has better resistance to pitting corrosion than the other chromium-nickel stainless steels where brines, sulphur-bearing water or halogen salts, such as chlorides are present. A valuable property of T-316 is high creep strength at elevated temperatures. Other mechanical properties and fabricating characteristics are similar to T-304.

Wire cloth woven of T-316 has extensive use in chemical processing when better corrosion resistance is required than the regular chromium-nickel types.

Type 316 L :

Type 316 L is very similar to T-316, the difference being the reduced carbon content for better wire cloth weaving and secondary welding characteristics.

We specialize in:

Plain Weave of Stainless Steel Wire Mesh

Technical Note:

Standard roll width: 1m, 3ft and 4ft

Standard roll length: 15m and 30m

Material: AISI 304/316

Twill Weave of Stainless Steel Wire Mesh

Technical Note:

Details on demand

Given below are the specifications of our multifareous Stainless Steel Wire Mesh products.

Specification List of Stainless Steel Wire Mesh
Mesh/Inch	Wire Gauge(SWG)	Aperture in mm

20mesh x 20mesh	30	0.95
30mesh x 30mesh	34	0.61
40mesh x 40mesh	36	0.44
50mesh x 50mesh	38	0.36
60mesh x 60mesh	40	0.30
80mesh x 80mesh	42	0.21
100mesh x 100mesh	44	0.172
120mesh x 120mesh	44	0.13
150mesh x 150mesh	46	0.108
160mesh x 160mesh	46	0.097
180mesh x 180mesh	47	0.09
200mesh x 200mesh	47	0.077
250mesh x 250mesh	48	0.061
300mesh x 300mesh	49	0.054
325mesh x 325mesh	49	0..054
350mesh x 350mesh	49	0.042
400mesh x 400mesh	50	0.0385
500mesh x 500mesh	50	0.0385
Roll width: 1m, 3'-4'